THIS SITE IS FOR SALE
CALL US WATER SYSTEMS - 1-800-608-8792

 
Flow-Max Pleated FiltersFlow-Max Stainless Steel Housings
 

Flow-Max 2-3/4"OD Standard Pleated Cartridges

flow-max 2-3/4" cartridgesflow-max pressure dropFlow-Max Standard Cartridges are 2-3/4" OD and are designed to fit in any standard filter housing that uses 2-3/4" filters. The pleated design yields higher flow rates than standard depth (spun poly) filters. Maximum flow rates are 3-10 GPM per 10" of cartridge depending on micron rating. Flow-Max micron ratings vary from 0.35 micron to 100 micron for the standard cartridges.

 

 

 

 

Flow-Max 4-1/2"OD Full-Flow Pleated Cartridges

flow-max full flow cartridgesflow-max big blue pressure dropFlow-Max Full-Flow Cartridges are 4-1/2" OD and are designed to fit in any big-blue style filter housing that uses 4-1/2" filters. The pleated design yields higher flow rates than standard depth (spun poly) filters. Maximum flow rates are 8-25 GPM depending on micron rating. Flow-Max micron ratings vary from 0.35 micron to 50 micron for the full-flow cartridges.

 

 

 

Flow-Max Jumbo Pleated Cartridges

flow-max jumbo cartridgesflow-max jumbo pressure dropFlow-Max Jumbo cartridges are designed to simplify filter changes for high flow rate applications. With maximum flow rates up to 150 GPM (Jumbo 170), much higher flow rates can be achieved with the use of just a single cartridge. Filter media is still 100% cellulose-free with micron ratings from 0.35 micron to 150 micron.

 

 

 

Flow-Max Phenolic Cellulose High Temperature Pleated Cartridges

flow-max phenolic cellulose filtersFlow-Max Phenolic Cellulose cartridges are designed for high temperature industrial applications where water and oil is filtered. The maximum temperature is 250°F (121°C) and the maximum pressure is 70 PSID (482 k PA). End caps, cores, & outer body are constructed of electro plated tin and the filtration media is phenolic impregnated cellulose. Phenolic cellulose cartridges are not to be used for potable water.

 

 

 

 

 

 

Flow-Max Stainless Steel Filter Housings

flow-max stainless housingsFlow-Max commercial quality stainless steel filter housings are designed for installations that require higher flow rates than what traditional plastic filter housings can deliver. By combining many filters together into one housing, flow rates up to 440 GPM can be achieved.